Categories

BASSBOSS DJ18S Powered 18 inch Subwoofer

BASSBOSS DJ18S Powered 18 inch Subwoofer
BASSBOSS DJ18S Powered 18 inch Subwoofer BASSBOSS DJ18S Powered 18 inch Subwoofer BASSBOSS DJ18S Powered 18 inch Subwoofer
Brand: BASSBOSS
Product Code: DJ18S
Reward Points: 24
Availability: In Stock
Price: $3,125.00 $2,495.00
Price in reward points: 3125
Qty:  
   - OR -   

The DJ18S Powered Subwoofer offers Huge Low End from a Smaller, Lighter Cabinet

FOR THE LOVE OF BASS

WH-UPPING THE ANTE

  • Deep + Loud Low Bass
  • Smaller, Lighter Cabinet
  • Best BASS for the Price

The DJ18S squashes the competition, in BASSBOSS style. Out of the Kiddie Pool, Into the Deep End

WHY CHOOSE A DJ18S Subwoofer?

Jaw-dropping bass from smaller, lighter cabinet.

We continue to push the envelope by what can be achieved with a portable subwoofer.

NO NEED TO HOLD BACK!

BASSBOSS subs are optimized for full-power usage.

Multiple proprietary protection technologies ensure that the woofers remain within their excursion and thermal limits, so they don't break or burn like other subs. BASSBOSS provides much higher levels of deep bass than mass-market subs, reliably.

With plenty of headroom to keep up with the most enthusiastic crowd and not run out of bass.

So don't doubt - turn it up! Great sound feels good.

HAND-BUILT CABINETS:

The DJ18S is a single 18″ powered subwoofer designed to minimize materials cost and weight and maximize efficiency and output. The DJ18S is an efficient, universal application, cost-effective single 18″ subwoofer. It features an 18″ driver with a 4″ voice coil and a 2400W amplifier in a Baltic Birch enclosure.

BASSBOSS cabinets are hand-built in the USA. Constructed from 18mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives. Stainless steel bolts are used to secure the driver, amplifier and pole sockets.

Created to stand up to intense usage. The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powdercoated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage.

PRODIGIOUS AMPLIFICATION:

A 2400W RMS amplifier with integrated, comprehensive DSP is included. The amplifier is rated for RMS output using continuous sine wave signal.

This is not a Peak or Burst power rating. BASSBOSS uses only continuous RMS power ratings because you’re not going to be using your sub in millisecond bursts. For subwoofer applications, Peak and Burst power ratings are largely irrelevant.

The amplifier is capable of delivering 2400W of continuous output. This ensures the amp isn’t the limiting factor in the output of low frequencies. Providing abundant power prevents overheating issues and virtually eliminates the damage that clipping a too-small amp can cause.

RUGGED DRIVERS:

All that electrical power is converted into acoustical energy by an 18 inch neodymium motor woofer. This premium-quality driver features a split-wound 100 mm (4 in) copper voice coil, and peak-to-peak excursion capability of up to 57 mm.

The woofer cones are waterproofed. BASSBOSS woofers can survive light rain, spilled drinks and dusty environments that may leave the drivers needing a thorough cleaning. Keep the amplifiers dry and party on!

High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet. Split-wound coils produce a more linear force through the range of movement of the cone, which results in lower distortion and improved linearity at high output.

The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!

Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.

FOCUSED TUNING:

BASSBOSS subs can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and yet minimal manipulation is applied to the signal. The processing includes only a high pass filter and a low-pass filter. There is no need for any EQ in the signal for the speaker to provide a broad, flat frequency response. A sophisticated limiter system protects the woofer from thermal and over-excursion damage.

Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.

TRUE SPECIFICATIONS:

BASSBOSS technical specs are based on measurements of continuous performance in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.

BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.

Read more about BASSBOSS Designer David Lee’s specifications philosophy on ProSoundNetwork.

BASSBOSS DJ18S ACOUSTICAL Specifications:

  • Loudspeaker Description High-output Single 18 inch Subwoofer
  • Frequency Response (±3 dB) 27 – 100 Hz
  • Maximum Sustained Output 127 dB SPL, 1 meter, half-space (ground plane)
  • Nominal Dispersion (H° x V°) 360 x 360 – Cardioid Mode Available with Multiple Boxes

BASSBOSS DJ18S Electrical Specifications:

  • Amplification: 2400 Watt Continuous RMS Class D Subwoofer Amplifier
  • Processing: Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting
  • Electrical Connectors, Amplifier: Neutrik powerCON Input (Blue) NAC3FCA
  • Electrical Connector, Mains: Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison)
  • Voltage Operating Range: 90-132VAC, 55-65Hz
  • Current Draw, Nominal: 360 W, 3A @ 120 volts (typical, 1/8 max power)
  • Signal Input Connector: XLR-F
  • Signal Output Connector: XLR-M (pass-through only)

BASSBOSS DJ18S Physical Specifications:

  • Enclosure Type: Direct radiating, vented enclosure, optimally tuned for high sensitivity at extremely low frequencies
  • Transducer: 1 x 18 in. diameter (457 mm) neodymium motor woofer with 4 in. (100 mm) split winding copper voice coil. Waterproof fiber composite cone
  • Cabinet Construction: 18 mm Baltic Birch plywood. Equipped with 2 integrated handles, 1 pole socket, and 4 rubber feet
  • Dimensions (HxWxD): 27.5 in. x 20.5 in. x 29.5 in. (28.25 in. high with feet)
  • Net Weight: 110 lbs
  • Shipping Weight: 120 lbs
  • Exterior Finish: Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating
  • Grill: Perforated, powder-coated steel
  • Pole Sockets: 1 (35 mm)
  • Handles: 2 Integrated Handles

BASSBOSS DJ18S OPTIONAL Equipment:

  • Transport Dollies Dolly cart, requires 4-part assembly, holds one box for transporting 1 cabinet
  • Covers Heavy-duty padded nylon transport cover for 1 cabinet

ENHANCED COMPONENT WARRANTY

BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase, subject to the limitations outlined below.

STANDARD CABINET WARRANTY

BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of 6 years from the date of purchase against defects in materials and workmanship, subject to the limitations outlined below. It is our goal to provide trouble-free loudspeakers. That objective begins as part of the design phase but it continues on through to any service you may require. In order to be able to provide the lowest possible failure rate, the best possible warranty service and the fastest turn-around time,we request that you contact us immediately if you notice any problem with your system, but before you attempt any repairs.

We can usually provide the best and fastest solution if we know the details of the problem before any repair attempts are made. Warranty service is a service, and part of that service includes helping you prevent failures and minimize repair and shipping costs. While it is necessary for us to place limits on the warranty, we do so to discourage abuse and make it possible for us to use our discretion to provide superior service.

WARRANTY LIMITATIONS

During the warranty period, if your loudspeaker malfunctions or fails due to any defect in components or manufacturing, the failed parts will be repaired or, at our sole discretion, replaced. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Warranty status will be determined upon inspection by BASSBOSS personnel.

This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Music Gear For Less © 2018