Categories

BASSBOSS DJ21S Powered 21 inch Subwoofer

BASSBOSS DJ21S Powered 21 inch Subwoofer
BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer BASSBOSS DJ21S Powered 21 inch Subwoofer
Brand: BASSBOSS
Product Code: DJ21S
Reward Points: 29
Availability: In Stock
Price: $3,745.00 $2,995.00
Price in reward points: 3745
Qty:  
   - OR -   

The DJ21S Powered Subwoofer Moves the Earth Beneath Your Feet

NEW! THE “LOCO MOJO” SUB Bringing the BOOM

  • Intensely DEEP BASS
  • Surprisingly Small & Light
  • Incredible Output-To-Price Ratio

High-powered single 21″ sub optimized to deliver exceptional value for deep-bass output. Killer low frequency response and intense SPL for the size set this sub above, and below, the rest.

WHY CHOOSE A DJ21S Subwoofer?

“Loco Mojo” = Crazy Movement!

With performance down to 24 Hz, the DJ21S will move the floor beneath you, along with everyone and everything in the room. For DJs and venues seeking extremely deep bass at very high levels, the DJ21S is the smallest, lightest and most cost-effective solution available. Suitable for the truly bass-insatiable, whose focus is on modern music that features frequencies well below the usual 40-50Hz range.

This extremely compact subwoofer weighs only 138 lbs and delivers output down to 24Hz (-3dB). The DJ21S is +2.5dB at 30 Hz while most subs are -10dB at 30 Hz.

That’s an equivalent output ratio of 4:1 at the lowest notes – and other mobile subs don’t get anywhere near this deep. Nothing else on the market of this size comes close – guaranteed. So you can buy four mass-market subs that cost more, weigh more, take up more space, and don’t blow people away… or use just one DJ21S.

DON'T HOLD BACK!

BASSBOSS subs are optimized for full-power usage.

Multiple proprietary protection technologies ensure that the woofers remain within their excursion and thermal limits, so they don't break or burn like other subs. BASSBOSS provides much higher levels of deep bass than mass-market subs, reliably.

With plenty of headroom to keep up with the most enthusiastic crowd and not run out of bass.

So turn it up, and keep it up. BASS is good for you.

HAND-BUILT CABINETS:

The DJ21S cabinet is a vented enclosure that is tuned to optimize extremely low frequency output using a very large port. It was designed specifically to minimize materials cost and weight, and maximize efficiency.

Able to effortlessly reproduce the lowest notes in modern music. With frequency response down to 24 Hz, you can guarantee that you will hear, and feel, the deepest frequencies.

BASSBOSS cabinets are hand-built in the USA. They are constructed from 18mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives.

Created to stand up to intense usage. The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powdercoated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection.

PRODIGIOUS AMPLIFICATION:

A 2400W RMS amplifier with integrated, comprehensive DSP is included. The amplifier is rated for RMS output using continuous sine wave signal.

This is not a Peak or Burst power rating. BASSBOSS uses only continuous RMS power ratings because you’re not going to be using your sub in millisecond bursts. For subwoofer applications, Peak and Burst power ratings are largely irrelevant.

The amplifier is capable of delivering 2400W of continuous output. This ensures the amp isn’t the limiting factor in the output of low frequencies. Providing abundant power prevents overheating issues and virtually eliminates the damage that clipping a too-small amp can cause.

RUGGED DRIVERS:

All that electrical power is converted into acoustical energy by a 21 inch neodymium motor woofer. This premium-quality driver features a split-wound 4.5 inch 4-layer copper-clad aluminum voice coil, and peak-to-peak excursion capability of up to 60 mm.

High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet. Split-wound coils produce a more linear force through the range of movement of the cone, which results in lower distortion and improved linearity at high output.

The woofer cones are waterproofed. BASSBOSS woofers can survive light rain, spilled drinks and dusty environments that may leave the drivers needing a thorough cleaning. Keep the amplifiers dry and party on!

The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!

Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.

FOCUSED TUNING:

BASSBOSS subs can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and yet minimal manipulation is applied to the signal. The processing includes only a high pass filter and a low-pass filter. There is no need for any EQ in the signal for the speaker to provide a broad, flat frequency response. A sophisticated limiter system protects the woofer from thermal and over-excursion damage.

Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.

TRUE SPECIFICATIONS:

BASSBOSS technical specs are based on measurements of continuous performance in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.

BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.

Read more about BASSBOSS Designer David Lee’s specifications philosophy on ProSoundNetwork.

BASSBOSS DJ21S ACOUSTICAL Specifications:

  • Loudspeaker Description High-output Single 21 inch Subwoofer
  • Frequency Response (±3 dB) 24 – 90 Hz
  • Maximum Sustained Output 132 dB SPL, 1 meter, half-space (ground plane)
  • Nominal Dispersion (H° x V°) 360 x 360 – Cardioid Mode Available with Multiple Boxes

BASSBOSS DJ21S Electrical Specifications:

  • Amplification: 2400 Watt Continuous RMS Class D Subwoofer Amplifier
  • Processing: Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting
  • Electrical Connectors, Amplifier: Neutrik powerCON Input (Blue) NAC3FCA
  • Electrical Connector, Mains: Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison)
  • Voltage Operating Range: 90-132VAC, 55-65Hz
  • Current Draw, Nominal: 360 W, 3A @ 120 volts (typical, 1/8 max power)
  • Signal Input Connector: XLR-F
  • Signal Output Connector: XLR-M (pass-through only)

BASSBOSS DJ21S Physical Specifications:

  • Enclosure Type: Direct radiating, vented enclosure, optimally tuned for high sensitivity at extremely low frequencies
  • Transducer: 1 x 21 in. diameter (530 mm) neodymium motor woofer with 4.5 in. (115 mm) copper-clad aluminum winding voice coil and 60 mm (2.36″) peak to peak excursion. Waterproof fiber composite cone
  • Cabinet Construction: 18 mm Baltic Birch plywood. Equipped with 2 integrated handles, 1 pole socket, and 4 rubber feet
  • Dimensions (HxWxD): 35 in. x 24 in. x 24 in. (35.75 in. high with feet)
  • Net Weight: 138 lbs
  • Shipping Weight: 160 lbs
  • Exterior Finish: Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating
  • Grill: Perforated, powder-coated steel
  • Pole Sockets: 1 (35 mm)
  • Handles: 2 Integrated Handles

BASSBOSS DJ21S OPTIONAL Equipment:

  • Transport Dollies Dolly cart, requires 4-part assembly, holds one box for transporting 1 cabinet
  • Covers Heavy-duty padded nylon transport cover for 1 cabinet

ENHANCED COMPONENT WARRANTY

BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase, subject to the limitations outlined below.

STANDARD CABINET WARRANTY

BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of 6 years from the date of purchase against defects in materials and workmanship, subject to the limitations outlined below. It is our goal to provide trouble-free loudspeakers. That objective begins as part of the design phase but it continues on through to any service you may require. In order to be able to provide the lowest possible failure rate, the best possible warranty service and the fastest turn-around time,we request that you contact us immediately if you notice any problem with your system, but before you attempt any repairs.

We can usually provide the best and fastest solution if we know the details of the problem before any repair attempts are made. Warranty service is a service, and part of that service includes helping you prevent failures and minimize repair and shipping costs. While it is necessary for us to place limits on the warranty, we do so to discourage abuse and make it possible for us to use our discretion to provide superior service.

WARRANTY LIMITATIONS

During the warranty period, if your loudspeaker malfunctions or fails due to any defect in components or manufacturing, the failed parts will be repaired or, at our sole discretion, replaced. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Warranty status will be determined upon inspection by BASSBOSS personnel.

This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Music Gear For Less © 2018