Categories

BASSBOSS SSP118-MKII Powered 18 inch Subwoofer

BASSBOSS SSP118-MKII Powered 18 inch Subwoofer
BASSBOSS SSP118-MKII Powered 18 inch Subwoofer BASSBOSS SSP118-MKII Powered 18 inch Subwoofer BASSBOSS SSP118-MKII Powered 18 inch Subwoofer BASSBOSS SSP118-MKII Powered 18 inch Subwoofer BASSBOSS SSP118-MKII Powered 18 inch Subwoofer
Brand: BASSBOSS
Product Code: SSP118-MKII
Reward Points: 28
Availability: In Stock
Price: $3,625.00 $2,895.00
Price in reward points: 3625
Qty:  
   - OR -   

Looking for Full, Rich Bass That Fills The Room? Look No Further. You’ll see head snaps when this comes on, guaranteed.

IT’S A CLUB IN A CAB

  • Solid, Flat Response Down To 30 Hz (-3dB)
  • Compact Size, Big Sound, Easy To Transport
  • Quick And Easy Setup – Plug-and-Play

For Mobile Professionals who provide superior sound quality. The SSP118 delivers premium sonic experiences unavailable with other manufacturer’s single 18″. This single cabinet will replace 3-4 competing cabinets, for more sound out of less space and cost. Why carry more?

WHY CHOOSE A SSP118 Subwoofer?

It's The Nightclub Experience, Mobilized: Turn heads when you turn it on.

Bad-boy for mobile DJs and small venues, a single 18″ cabinet that delivers like a double 18″. With low frequency output down to 30 Hz and sustained output up to 130 dB, you can easily bring serious bass for mid-size rooms with a single cabinet.

Each SSP118 Subwoofer offers the SPL of two, three and in some cases four mass-market subs, with deep-bass output competitors don’t touch, in a much smaller overall package.

Fits in a hatchback, rolls in and out on a custom wheel cart. Slick.

DON'T HOLD BACK!

BASSBOSS subs are optimized for full-power usage.

Multiple proprietary protection technologies ensure that the woofers remain within their excursion and thermal limits, so they don't break or burn like other subs. BASSBOSS provides much higher levels of deep bass than mass-market subs, reliably.

With plenty of headroom to keep up with the most enthusiastic crowd and not run out of bass.

So turn it up, and keep it up. BASS is good for you.

HAND-BUILT CABINETS:

The SSP118 is a vented, direct radiating single 18″ subwoofer with extensive bracing, easy portability and frequency response that rivals many double-18″ subs. Very large ports maximize low frequency performance at high output. The ports exit outside the perimeter of the woofer grill to minimize air flow noise. The port walls, handles and amplifier recess are all designed to serve as braces in addition to their primary purposes, making the cabinet extremely rigid. The port openings and amplifier recess also offer grab points on the front and rear of the cabinet.

BASSBOSS cabinets are hand-built in the USA. Constructed from 18mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives.

A top-mounted pole socket provides for mid-high loudspeakers to be mounted on a straight speaker pole above the subwoofer. The enclosures feature four large rubber feet on the bottom, with corresponding recesses in the opposite side to facilitate interlocking the boxes when stacked.

There are two handles on each side. The amplifier recess is designed to also serve as a handle on the back of the cabinet and the port openings allow lifting from the front.

Created to stand up to intense usage. The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powdercoated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage, direct sun and moisture.

PRODIGIOUS AMPLIFICATION:

A 2400W RMS amplifier with integrated, comprehensive DSP is included. The amplifier is rated for RMS output using continuous sine wave signal.

This is not a Peak or Burst power rating. BASSBOSS uses only continuous RMS power ratings because you’re not going to be using your sub in millisecond bursts. For subwoofer applications, Peak and Burst power ratings are largely irrelevant.

Capable of delivering 2400W of continuous output. This ensures the amplifier isn’t the limiting factor in the output of low frequencies. Providing abundant power prevents overheating issues. It virtually eliminates the damage that clipping an amp that’s too small can cause.

For larger events, several arraying options are available. Block arrays, side-by-side arrays and front/back Cardioid arrays can be deployed securely thanks to the interlocking feet. Presets are included in the DSP.

RUGGED DRIVERS:

All that electrical power is converted into acoustical power by an 18″ neodymium motor woofer. This premium-quality driver features split-wound 4″ copper voice coil, and peak-to-peak excursion capability of up to 56 mm.

High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet. Split-wound coils produce a more linear force through the range of movement of the cone, which results in lower distortion and improved linearity at high output.

The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!

Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.

FOCUSED TUNING:

BASSBOSS subs can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and yet minimal manipulation is applied to the signal. The processing includes only a high pass filter and a low-pass filter. There is no need for any EQ in the signal for the speaker to provide a broad, flat frequency response. A sophisticated limiter system protects the woofer from thermal and over-excursion damage.

Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.

TRUE SPECIFICATIONS:

BASSBOSS technical specs are based on measurements of continuous performance in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.

BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.

Read more about BASSBOSS Designer David Lee’s specifications philosophy on ProSoundNetwork.

BASSBOSS SSP118 ACOUSTICAL Specifications:

  • Loudspeaker Description: High-output Single 18 inch Subwoofer
  • Frequency Response (±3 dB): 30 – 100 Hz
  • Maximum Sustained Output: 130 dB SPL, 1 meter, half-space (ground plane)
  • Nominal Dispersion (H° x V°): 360 x 360 – Cardioid Mode Available with Multiple Boxes

BASSBOSS SSP118 Electrical Specifications:

  • Amplification: 2400 Watt Continuous RMS Class D Subwoofer Amplifier
  • Processing: Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting
  • Electrical Connectors, Amplifier: Neutrik powerCON Input (Blue) NAC3FCA
  • Electrical Connector, Mains: Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison), Optional electrical plugs available, including L5-30 and others, upon request. Please contact us for more information.
  • Voltage Operating Range: 90-132VAC, 55-65Hz
  • Current Draw, Nominal: 564 W, 4.7A @ 120 Volts (typical, 1/8 max power)
  • Signal Input Connector: XLR-F
  • Signal Output Connector: XLR-M (pass-through only)

BASSBOSS SSP118 Physical Specifications:

  • Enclosure Type: Direct radiating, vented enclosure, optimally tuned for low frequency response with high sensitivity and high power handling
  • Transducer: 1 x 18 in. diameter (457 mm) neodymium motor woofer with 4 in. (100 mm) copper winding voice coil and 56 mm (2.2″) peak to peak excursion. Waterproof fiber composite cone
  • Cabinet Construction: 18 mm Baltic Birch plywood, extensive integrated bracing. Equipped with 4 integrated handles, 1 pole socket, 4 large rubber feet, and 4 interlocking foot pockets
  • Dimensions (HxWxD): 22.5 in. x 30 in. x 24 in. (23.25 in. high with feet)
  • Net Weight: 125 lbs
  • Shipping Weight: 140 lbs
  • Exterior Finish: Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating
  • Grill: Perforated, powder-coated steel
  • Pole Sockets: 1 (35 mm)
  • Handles: 4 Integrated Handles

BASSBOSS SSP118 OPTIONAL Equipment:

  • Flying Hardware: Side-pull anchors and/or shoulder eyebolts
  • Suspension System: 16 x 3/8 in.-16tpi threaded flypoints
  • Amplification for Installation: Complete power package including DSP in two space rack chassis for permanent installations
  • Installation Version: Available without handles and pole sockets
  • Transport Dollies: Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 to 2 cabinets
  • Covers: Heavy-duty padded nylon transport covers for 1 or 2 cabinets

BASSBOSS WARRANTY COVERAGE DETAILS:

SOUND DEFENSE -THE 'NO BLOW' COVERAGE PROGRAM

Sound Defense is a fully-transferable, enhanced warranty program that adds coverage of all driver components, including subwoofer voice coils, for two years.

With Sound Defense if a driver (woofer) fails within the program term, it will be repaired or replaced without charge. Customers can also extend the “Sound Defense” program beyond the initial term through an annual subscription. Shipping costs are not included.

ENHANCED COMPONENT WARRANTY

BASSBOSS self-powered loudspeaker electronic components, amplifiers and digital processors are warranted for a period of three years from the date of purchase, subject to the limitations outlined below.

STANDARD CABINET WARRANTY

BASSBOSS loudspeaker cabinets (wood, joinery and fasteners) are warranted for a period of 6 years from the date of purchase against defects in materials and workmanship, subject to the limitations outlined below. It is our goal to provide trouble-free loudspeakers. That objective begins as part of the design phase but it continues on through to any service you may require. In order to be able to provide the lowest possible failure rate, the best possible warranty service and the fastest turn-around time,we request that you contact us immediately if you notice any problem with your system, but before you attempt any repairs.

We can usually provide the best and fastest solution if we know the details of the problem before any repair attempts are made. Warranty service is a service, and part of that service includes helping you prevent failures and minimize repair and shipping costs. While it is necessary for us to place limits on the warranty, we do so to discourage abuse and make it possible for us to use our discretion to provide superior service.

WARRANTY LIMITATIONS

During the warranty period, if your loudspeaker malfunctions or fails due to any defect in components or manufacturing, the failed parts will be repaired or, at our sole discretion, replaced. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Warranty status will be determined upon inspection by BASSBOSS personnel.

This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Music Gear For Less © 2018