Categories

Powerwerks 150 Watt P.A. System with Digital Effects & Bluetooth

Powerwerks 150 Watt P.A. System with Digital Effects & Bluetooth
Powerwerks 150 Watt P.A. System with Digital Effects & Bluetooth
Brand: Powerwerks
Product Code: PW150TFXBT
Reward Points: 2
Availability: In Stock
Price: $449.99 $299.99
Price in reward points: 449
Qty:  
   - OR -   


Powerwerks PW150TFXBT 150 Watt Self-Contained Personal P.A. System with Digital Effects & Bluetooth

The PW150TFXBT Bluetooth P.A. System combines quality performance and convenient features, all in a highly portable package.

The four 4.5" speakers and high-frequency driver provide just the right combination of high and midrange sounds. This balance ensures your vocals cut through the mix while minimizing harsh and unwanted frequencies. The PW150TFXBT construction is based on the same tried-and-true techniques as the rest of the speaker line. This includes a heavy-duty steel grill and rigid corners. This model also utilizes a high-frequency driver for crisp, accurate reproduction of treble frequency and articulate speech. For the soloist or acoustic duo, the PW150TFXBT works well when positioned on a standard speaker stand. The PW150TFXBT is the first Powerwerks Tower to feature a dedicated Monitor Out as well as a seperate Subwoofer output. The PW150TFXBT allow features 4 built-in effects: Room Reverb, Hall Reverb, Chorus+Reverb, and Delay+Reverb. The Powerlink Circuit allows two or more units to be linked together and function as one P.A. system. As your following grows, so does your sound system. Multiple units can be connected to increase the sound coverage in your venue of choice. With the PW150TFXBT's built-in Bluetooth capability, you can easily connect any bluetooth-enabled device to the PW150TFXBT to stream audio wirelessly!

Powerwerks PW150TFXBT Features:

  • Bluetooth: Connect any Bluetooth Compatible Device Wirelessly
  • Built-in Digital Effects with Level Control: Room Reverb, Hall Reverb, Chorus+Reverb or Delay+Reverb
  • Master Level Control
  • Twin 4.5" Drivers with High-Frequency Horn
  • Three Channel Mixer
  • Two Instrument / Mic Channels
    •  XLR Mic Inputs and 1/4" Instrument Inputs per Channel
    •  Both Inputs can be used simultaneously - High and Low EQ for Music Channel
  • Subwoofer Out
  • Monitor Out with Line Level Control
  • Standard Speaker Stand-mount Adapter Built-in

Powerwerks PW150TFXBT Specifications:

  • Output Power (1% THD): 2 x 75W @ 2 x 4 ohm load
  • Accepted Inputs:
    • CH1 and CH2 Mic XLR Balanced, Line Level 1/4" Un-balanced
    • Ch3 1/8" Line Level or Bluetooth Device (150TFXBT models)
  • Frequency Response: 20Hz - 20KHz (Actual response is tailored to speaker cabinet for accurate acoustical response)
  • Hum & Noise:
    • -46dB Residual Noise, all level controls 0% (mimimum)
    • -37dB Nominal System Noise, all level controls at 50%
  • System Gain/Speaker Output: (Measurement made at 1kHz)
    • +49dB Mic to Speaker Output (CH 1 & CH2)
    • +35dB Line to Speaker Output (CH1 & CH2)
    • +25dB Aux In to Speaker Output
  • Channel EQ: (high, low) 4kHz and above, 800Hz and below
  • POWERLINK: (IN and OUT) Both jacks accept a balanced input and sends a pre-master volume output mix of channels. Recommended use: Linking two PW150's
  • Subwoofer Out (Line Out) 20Hz - 150Hz
  • Monitor Out: (Line Out) Balanced TRS Output with grounded sleeve
  • Phantom Power: (+15V) Mic inputs (CH1 & CH2)
  • Power Requirements:
    • USA/Canada 120VAC/60Hz, 300W nominal
    • Europe 230VAC/50Hz, 300W nominal
    • UK 230VAC/50Hz, 300W nominal
    • Australia 240VAC/50Hz, 300W nominal
    • Japan 100VAC/50-60Hz, 300W nominal
  • Speakers Four 4 1/2" 50W 8 ohm each
  • High-Frequency Horn: 3 1/2" Piezo Driver
  • Power Capacity 150W RMS
  • Speaker's Acoustic Frequency Response:
    • 60Hz-20KHz Full range (subwoofer jack not used)
    • 150Hz-20KHz Crossover Active (1/4" mono plug in subwoofer jack)
  • Nominal Impedance: 4 ohm x 2 (Not designed for external speakers)
  • Bluetooth Module Features: Bluetooth 3.0+EDR compliant. Typical +2dBm Class 2 output power. Audio DAC:94dB SNR. A2DP profile support
  • Dimensions & Weight: (Inches/Pounds) 7.5'' W x 28'' H x 6.5'' D / 25 lbs

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Music Gear For Less © 2017